Customer cases-arkiv - Svizza https://svizza.com/en/category/customer-cases/ Industriservice Mon, 11 May 2026 08:01:27 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1 https://svizza.com/wp-content/uploads/2025/07/webbplatsikon_S-150x150.webp Customer cases-arkiv - Svizza https://svizza.com/en/category/customer-cases/ 32 32 Machine relocation at Ljunghäll https://svizza.com/en/machine-relocation-at-ljunghall/ Mon, 11 May 2026 08:01:25 +0000 https://svizza.com/?p=4850 We completed modifications to walkways, stairs, and railings, as well as the fabrication of new bollards impact protection barriers to enhance safety.

Inlägget Machine relocation at Ljunghäll dök först upp på Svizza.

]]>
We completed modifications to walkways, stairs, and railings, as well as the fabrication of new bollards impact protection barriers to enhance safety.

Inlägget Machine relocation at Ljunghäll dök först upp på Svizza.

]]> Conveyor belt replacement at Skoghall Raumaster https://svizza.com/en/conveyor-belt-replacement-at-skoghall-raumaster/ Thu, 07 May 2026 13:48:59 +0000 https://svizza.com/?p=4793 At Skoghall Raumaster, we replaced the conveyor belt feeding the carton roll packaging line.
We installed the new system and associated welding around it to integrate the new components with the remaining parts of the existing structure.

Inlägget Conveyor belt replacement at Skoghall Raumaster dök först upp på Svizza.

]]>
At Skoghall Raumaster, we replaced the conveyor belt feeding the carton roll packaging line. We installed the new system and associated welding around it to integrate the new components with the remaining parts of the existing structure.

Inlägget Conveyor belt replacement at Skoghall Raumaster dök först upp på Svizza.

]]> Relocation at Ovako Hällefors https://svizza.com/en/relocation-at-ovako-hallefors/ Thu, 07 May 2026 12:16:50 +0000 https://svizza.com/?p=4767 A complete relocation of the machine park from Svets Mekaniska in Hällefors to its new site at Ovako Hällefors.
The assignment included the dismantling, transportation, and reinstallation of all machinery.
To ensure precise positioning, we used a Trimble S9 HP for measurement and installation, achieving maximum accuracy throughout the process.

Inlägget Relocation at Ovako Hällefors dök först upp på Svizza.

]]>
A complete relocation of the machine park from Svets Mekaniska in Hällefors to its new site at Ovako Hällefors. The assignment included the dismantling, transportation, and reinstallation of all machinery. To ensure precise positioning, we used a Trimble S9 HP for measurement and installation, achieving maximum accuracy throughout the process.

Inlägget Relocation at Ovako Hällefors dök först upp på Svizza.

]]> Measurement and relocation at Ovako Group https://svizza.com/en/relocating-at-ovako-group/ Thu, 07 May 2026 09:49:27 +0000 https://svizza.com/?p=4749 Relocation of a machining line. We were involved in the entire process, from the initial dismantling to the final commissioning of the line. After dismantling the old equipment, we constructed the new line. Using a Trimble S9 HP, Björn was able to precisely position the machinery with millimeter accuracy, followed by the final installation of the machines and the entire line.

Inlägget Measurement and relocation at Ovako Group dök först upp på Svizza.

]]>
Relocation of a machining line. We were involved in the entire process, from the initial dismantling to the final commissioning of the line. After dismantling the old equipment, we constructed the new line. Using a Trimble S9 HP, Björn was able to precisely position the machinery with millimeter accuracy, followed by the final installation of the machines and the entire line.

Inlägget Measurement and relocation at Ovako Group dök först upp på Svizza.

]]> Relocation at IAC https://svizza.com/en/relocation-at-iac/ Wed, 06 May 2026 15:03:29 +0000 https://svizza.com/?p=4713 Relocation and installation of two casting cells from Ljunghäll AB to IAC Hultsfred.

Inlägget Relocation at IAC dök först upp på Svizza.

]]>
Relocation and installation of two casting cells from Ljunghäll AB to IAC Hultsfred.

Inlägget Relocation at IAC dök först upp på Svizza.

]]> Arctic Paper Grycksbo AB https://svizza.com/en/arctic-paper-grycksbo/ Wed, 06 May 2026 14:13:44 +0000 https://svizza.com/?p=4687 During the rebuild of paper machine PM9, we had up to 60 people on site to carry out a large-scale, time-sensitive project.

Inlägget Arctic Paper Grycksbo AB dök först upp på Svizza.

]]>

The scope included dismantling the existing hood and the line shaft drive, followed by the design and fabrication of new frames for the press drives. We then completed the installation of new drive systems for the press section, dryer section, and calendar.

This advanced project demanded high precision, meticulous planning, and close collaboration at every stage of the process.

Inlägget Arctic Paper Grycksbo AB dök först upp på Svizza.

]]> On-site installation at Barilla https://svizza.com/en/barilla/ Tue, 05 May 2026 12:59:56 +0000 https://svizza.com/?p=4668 We carried out a mill refurbishment project at Barilla. We upgraded the equipment by dismantling the existing system and installing a new one.

Inlägget On-site installation at Barilla dök först upp på Svizza.

]]>
We carried out a mill refurbishment project at Barilla. We upgraded the equipment by dismantling the existing system and installing a new one.

Inlägget On-site installation at Barilla dök först upp på Svizza.

]]> Renewcell in Sundsvall https://svizza.com/en/renewcell-in-sundsvall/ Fri, 14 Nov 2025 17:02:54 +0000 https://svizza.com/?p=4386 Several years ago, we built Renewcell’s development machine in Kristinehamn and were therefore also involved when a new drying machine was to be built in Sundsvall. The drying machine was constructed using a used machine that had previously been in France.

Inlägget Renewcell in Sundsvall dök först upp på Svizza.

]]>
sundsvall_11
sundsvall_10
sundsvall_9
sundsvall_8
sundsvall_7
sundsvall_6
sundsvall_5
sundsvall_4
sundsvall_2
sundsvall_1

Inlägget Renewcell in Sundsvall dök först upp på Svizza.

]]> Nexans https://svizza.com/en/nexans/ Fri, 14 Nov 2025 16:58:44 +0000 https://svizza.com/?p=4381 Machine relocation from Nexans Karmøy, Norway to Nexans AB Grimsås, Sweden! Measurement, labeling, and documentation before mechanical and electrical disassembly. Transport from Norway to Nexans Grimsås, Sweden. Mechanical and electrical assembly and commissioning.

Inlägget Nexans dök först upp på Svizza.

]]>

Inlägget Nexans dök först upp på Svizza.

]]> IMI-Hydronic https://svizza.com/en/imi-hydronic-2/ Fri, 14 Nov 2025 16:54:57 +0000 https://svizza.com/?p=4376 Relocation and installation of IMI – Hydronic production lines, for improved production flow and better use of facilities.

Inlägget IMI-Hydronic dök först upp på Svizza.

]]>
IMI-hydronic_6
IMI-hydronic_7
IMI-hydronic_8
IMI-hydronic_9
IMI-hydronic_10
IMI-hydronic_11
IMI-hydronic_4
IMI-hydronic_5

Inlägget IMI-Hydronic dök först upp på Svizza.

]]> Evomatic AB https://svizza.com/en/evomatic-ab-2/ Fri, 14 Nov 2025 16:42:03 +0000 https://svizza.com/?p=4371 Evomatic AB – manufacturing and automation of machines. Photos from Malaysia.

Inlägget Evomatic AB dök först upp på Svizza.

]]>

Inlägget Evomatic AB dök först upp på Svizza.

]]> We service and build Correa machines https://svizza.com/en/we-service-and-build-correa-machines/ Fri, 14 Nov 2025 16:22:03 +0000 https://svizza.com/?p=4359 We are in an exciting phase, having just started developing our collaboration with Carlstad Machinetools, the Swedish agent for Nicolás Correa. Over the years, we have worked closely together and are therefore very pleased to take this positive partnership a step further.

Inlägget We service and build Correa machines dök först upp på Svizza.

]]>

- A continuation of a positive collaboration with Carlstad Machinetools

We are in an exciting phase, having just started developing our collaboration with Carlstad Machinetools, the Swedish agent for Nicolás Correa. Over the years, we have worked closely together, and we are very pleased to take this positive partnership a step further.

The Spanish company Nicolás Correa manufactures machining equipment that, on the Swedish market, is sold exclusively by Carlstad Machinetools. When they were looking for a service company for the Correa machines, we were brought on board and are now tasked with building and servicing the approximately 400 machines currently in Sweden.

So far, we have helped assemble a machine at Car-O-Liner in Kungsör. The installation went very smoothly thanks to excellent collaboration with everyone involved. The machine was installed in a newly constructed facility, which made things easier since everything was tailored specifically for that machine.

We have also had two of our employees attend a course at Nicolás Correa in Spain.

“A very educational training and interesting to also see Nicolás Correa’s facility in Burgos, gaining insight into the manufacturing and assembly of their various machines,” says Fredrik Nilsson, who was one of the participants in the course.

The plan going forward is to construct a new facility in Kil where we can renovate machining equipment from across northern Europe. The project is currently in its early stages, and we are actively working on obtaining building permits.

Quick facts about the company Nicolás Correa:

Inlägget We service and build Correa machines dök först upp på Svizza.

]]>