Jenny Högefjord is the new CEO of Svizza. At the same time, Thomas Söderqvist takes on the role of Operations Manager. Jenny succeeds founder and former CEO Lennart Ernstsson, who has chosen to retire after 23 years with the company.
Jenny Högefjord is stepping into the role of CEO of Svizza, bringing Thomas Söderqvist with her as Operations Manager. Jenny succeeds founder and former CEO Lennart Ernstsson, who has chosen to retire after 23 years.
We completed modifications to walkways, stairs, and railings, as well as the fabrication of new bollards impact protection barriers to enhance safety.
Mondi Dynäs AB – Ongoing maintenance
Holmen Paper AB – Roll alignment and measurement
ORAB Entreprenad – Measurement and alignment of pumps and agitators
Northvolt Labs AB – Dismantling and packing of a new production line
Stora Enso Skoghall – Ongoing maintenance
Voith Högsjö – Dismantling of looms
Car-O-Liner Kungsör – Installation of a new bed milling machine for Corea
Mondi Dynäs AB – Ongoing maintenance
Sylvamo Nymölla – Ongoing maintenance and installation of an air turn system on PM1
Billerud Skärblacka – Ongoing maintenance
Deublin – Installation of a new condensate system
Barilla Filipstad – Crane refurbishment
Ovako Hällefors – Major installation project
Ljunghäll AB – Ongoing maintenance
Structural steelwork – New facility in Karlstad
Arctic Paper Grycksbo AB – Major rebuild of the drive system on PM9, among other works
Granitor Göteborg – Reconstruction work at Volvo Cars for Granitor
Talent Plastics Laxå – Ongoing maintenance
Arvika Gjuteri – Major refurbishment of a casting line
IMI Hydronic Engineering – Internal machine relocation to improve production flow
Ljunghäll AB – Ongoing maintenance
BillerudKorsnäs – Rebuild of a rewinder
Fortum Waste Solutions AB – Summer shutdown and various maintenance works
Billerud Gruvön – Ongoing maintenance
Intersystem – Installation of a conveyor system
Ukraine – Pro bono dismantling of diesel generators, which were then shipped to Ukraine
Stora Enso Skoghall – Ongoing maintenance
Fortum Waste Solutions AB – Summer shutdown and various maintenance works
SAFT AB – Installation of a complete production line
BillerudKorsnäs – Maintenance work
Outokumpu Stainless AB – Refurbishment of a pinch roll
Kaffehuset Karlstad – Ongoing maintenance
Ovako Hällefors –
Nexans Norway – Installation and commissioning of a new machine line in a new cable factory
Sylvamo Nymölla – Ongoing maintenance
At Skoghall Raumaster, we replaced the conveyor belt feeding the carton roll packaging line.
We installed the new system and associated welding around it to integrate the new components with the remaining parts of the existing structure.
A complete relocation of the machine park from Svets Mekaniska in Hällefors to its new site at Ovako Hällefors.
The assignment included the dismantling, transportation, and reinstallation of all machinery.
To ensure precise positioning, we used a Trimble S9 HP for measurement and installation, achieving maximum accuracy throughout the process.
Relocation of a machining line. We were involved in the entire process, from the initial dismantling to the final commissioning of the line. After dismantling the old equipment, we constructed the new line. Using a Trimble S9 HP, Björn was able to precisely position the machinery with millimeter accuracy, followed by the final installation of the machines and the entire line.
Relocation and installation of two casting cells from Ljunghäll AB to IAC Hultsfred.
During the rebuild of paper machine PM9, we had up to 60 people on site to carry out a large-scale, time-sensitive project.
We carried out a mill refurbishment project at Barilla. We upgraded the equipment by dismantling the existing system and installing a new one.
Buhler Group Die Casting, Husqvarna AB – Installation av aluminiumpress gjutcell.
Evomatic, Karlshamn – Montering av Automatisk transportsystem för pallar hos BBraun medical Malaysia.
Flytt av två gjutceller från gamla fueltech i Ronneby till IAC i Hultsfred.
Nexans, Halden – Utsättning av koordinatsystem i ny anläggning.
IMI-Hydronic, Ljung – Internal relocation of machines to improve production flow.
Söderenergi AB, Södertälje – Replacement of drives on fans and pumps.
Lessebo Paper AB – General repairs at the paper mill.
Re:newcell, Sundsvall – Assembly of pulp drying machine.
Probat, Kaffehuset (Löfbergs), Karlstad – Installation of new roasting equipment.
Cable manufacturing – Disassembly, packing, shipping, assembly, and reconstruction of a cable factory within the Nexans group. Relocated from Haugesund, Norway to Grimsås, Sweden.
Steel industry – Clearance of Ovako Forsbacka’s facility with relocation to Ovako plants in Smedjebacken, Hällefors, and Boxholm.
Several years ago, we built Renewcell’s development machine in Kristinehamn and were therefore also involved when a new drying machine was to be built in Sundsvall. The drying machine was constructed using a used machine that had previously been in France.
Machine relocation from Nexans Karmøy, Norway to Nexans AB Grimsås, Sweden! Measurement, labeling, and documentation before mechanical and electrical disassembly. Transport from Norway to Nexans Grimsås, Sweden. Mechanical and electrical assembly and commissioning.
Relocation and installation of IMI – Hydronic production lines, for improved production flow and better use of facilities.
Evomatic AB – manufacturing and automation of machines. Photos from Malaysia.
We are in an exciting phase, having just started developing our collaboration with Carlstad Machinetools, the Swedish agent for Nicolás Correa. Over the years, we have worked closely together and are therefore very pleased to take this positive partnership a step further.